INSTRUCTIONS

BEFORE PERFORMING THE TEST: Read and follow the instructions. Perform the test at room temperature.Blow nose to clear nasal cavities. Wash your hands before and after.

‍

TAKING THE SAMPLE: 1 Open the package containing the sampling swab. Do not touch the swab tip. Gently insert the tip of the swab into one nostril, 2-3 cm. Press it against the nasal wall and rotate for 20 seconds to collect nasal secretion.Repeat in the other nostril. 2 Remove the sample extraction tube seal and insert the swab. Press it against the sides and rotate for 10 seconds. 3Squeeze the sides of the tube to expel sample solution from the swab. Place the tube cap firmly onto the tube. Avoid touching the top of the tube cap. Shake the tube, or gently press the tube, to mix the sample solution. Let it rest for one minute to release viral antigens.

‍

‍TEST PROCEDURE: 4 Peel to open the foil pouch and remove the test cartridge from its package. Place it on a flat surface. Avoid touching the well and window of the test cartridge. 5 Turn and tap the test tube to mix the liquid again. Avoid touching the top of the tube cap. Hold the tube upside down and squeeze to expel 3 drops of sample solution into the loading well. Test result is displayed after 15-30 minutes.

‍

RESULTS: POSITIVE:Red line at C and T, regardless of how faint. White line at T is considered negative. NEGATIVE: Red line at C only, see Limitations. INVALID: Without line at C, retest with another test cartridge.

‍

AFTER TESTING: Contact a healthcare provider in case of a positive result. Additional testing, such as PCR test, may be required to confirm viral infection or to initiate infection tracing. Always follow local and governmental recommendations. Disinfect used products and samples, or place in a sealed waste bag, before discarding in household waste.